Lighting. Tuesday , September 18th , 2018 - 14:04:40 PM
Fluorescent lighting has been around a long time and you may not think it is that efficient. Old fluorescent lighting certainly isn't T12 and T8 tubes and their drivers can be horribly wasteful, sometimes using double the amount of power they are rated at. However T5 fluorescent tubes coupled with a modern ballast is remarkably efficient, almost as efficient in fact as LED lighting. Modern warm start ballasts have also increased reliability and allowed for extending the life of the tubes which can now reach as much as 30,000 or 40,000 hours. Modern drivers also operate at high frequency, unlike their older counterparts, which mean there is no longer a noticeable flicker with fluorescent lights. Fluorescent lights do also suffer from early failures, and because they rely on a filament the more often they are turned on and off the shorter their life will be; this means turning them on and of with presence detection to reduce their use and save money on your bill could backfire when you have to frequently replace the tubes. If you do go down this route make sure the drivers feature warm start and don't set the controls to frequently turn the lights on and off.
Do you really need your lights on all the time? This is a question you really need to ask yourself. Chances are you don't. Do you leave your office for 5 minutes and come back an hour later, in the meantime the lights have been burning the whole time. Are there aisles in your warehouse that are only used for 30 minutes a day but remain fully lit for 24 hours? If the answer to either of those questions, or countless others that I don't have room to write here, is yes then you could benefit from installing some lighting controls more advanced than an onoff switch. These come in various different flavours depending on your needs. They can control one light or a bank of lights, they can be sensitive the overall light level in the room this means that if sunlight is streaming through the window then the lights don't need to come on and won't. They can be used to detect the presence or the absence of people. They can dim lights or turn them on and off. What they all have in common is their ability to save you money by stopping you wasting electricity.
The first function of the bathroom is to dress, do hair, makeup, go to the commode, perform personal hygiene functions at the vanity and sink, and relax in the shower or bath by yourself or with someone - hence the romantic part of your plan. Your bathroom lighting design will be varied for each of these areas, so let's consider each one separately.
Label :Great Room Lighting Ideas‚ Modern Living Room Lights‚ Lamps For Family Room as well as Houzz Family Room Lighting‚ Sears Family Room Lamps‚ Living Room Ceiling Lighting Ideas plus Crystal Chandeliers For Living Rooms‚
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does otakuregion claim ownership or responsibility for such items a and you should seek legal consent for any use of such materials from its owner.